HRS 6000 Customzied size factory price Vibration isolation pad polyurethane pad

• Customization: Available
• Color: Fixed
• Customized: Customized
• Model NO.: HRS 6000
• Type: Bearing
• Material: Polyurethane rubber
• Thickness: 12.5/25mm
• Roll: 1.5m wide, 5.0m long
• Strip: Up to 1.5m wide, up to 5.0m long
• Shape: Customized
• Transport Package: Carton
• Specification: Customized
• Trademark: THERMOTEST/OEM
• Origin: China
• Production Capacity: 50000/Month

Product Description

Product Description

Material: closed-cell PU elastomer (Polyurethane)

Color: dark blue

Dimensions can be customized,Other dimensions, punched and moulded parts on request.

Thermotest is using "Sylodyn," a polyurethane dampening material. Compared to existing dampening rubber, Sylodyn is more durable, more stable and is able to be made thinner in order to fit into small spaces, making installation quick and easy.

 

Detailed Photos

 

 

Product Parameters

 

Range of use	Compressive	Deformation
	Shape factor-dependent, the specified values apply to shape factor of q=3
Static range of use (static loads)	up to 6.0N/mm^2	approx. 12%
Dynamic range of use (dynamic loads)	up to 9.0N/mm^2	up to 15%
Load peaks (occasional, brief loads)	up to 18.0 N/MM^2	approx. 25%

Technical Data
 

Material Properties		Test Methods	Comment
Mechanical loss factor	0.07	DIN 53513 ^1	temperature-, frequency-, specific load- and amplitude-dependent
Compression set^2	< 5 %	EN ISO 1856	25 % deformation, 23 °C, 72 h, 30 min after removal of load
Static shear modulus^3	3.5N/mm^2	DIN ISO 1827^1	at a pretension of 6.0 N/mm^2
Dynamic shear modulus^3	4.2N/mm^2	DIN ISO 1827^1	at a pretension of 6.0 N/mm^2, 10 Hz
Coefficient of friction (steel)	≥ 0.6	Werkstoffe	dry, static friction
Coefficient of friction (concrete)	≥ 0.7	Werkstoffe	dry, static friction
Thermal conductivity	0.17 W/mK	DIN EN 12664
Temperature range	-30 °C to 70 °C		short term higher temperatures possible
Flammability	class E	EN ISO 11925-2	normal combustible, EN 13501-1

¹Measurement/evaluation in accordance with the relevant standard
² The measurement is performed on a densitydependent basis with differing test parameters
³ Values apply to shape factor q = 3

 

· Quasi-static load deflection curve measured with a loading rate of
0.6 N/mm²/s.

· Testing be tween sandblasted, flat steel-plates; recording of the 1^st load, with filtered starting range in accordance with ISO 844, testing at room temperature.


· Shape factor q = 3

· Quasi-static modulus of elasticity as tangential modulus from the load deflection curve. Dynamic modulus of elasticity from sinusoidal excitation with a velocity level of 100 dBv re. 5 · 10^-8 m/s corresponding to a vibration amplitude of 0.22 mm at 10 Hz and 0.08 mm at 30 Hz.

· Measurement in accordance with DIN 53513

· Shape factor q = 3

· Natural frequencies of a vibratory system with a single degree of
free dome, consisting of a mass and an elastic bearing made of
Sylodyn® HRB HS 6000 on a rigid surface.

· Parameter: thickness of the Sylodyn® bearing

· Shape factor q = 3

 

· Deformation under consistent loading.

· Parameter: permanent static load

· Shape factor: q = 3
 

 

 

· Typical dependency of the dynamic modulus of elasticity on the
amplitude of vibration.

· Sylodyn® HRB HS 6000 materials exhibit a negligible dependency of
amplitude.

Company Profile