SLM -IC Air Spring Isolator Pneumatic Isolator

• Customization: Available
• Certification: CE, ISO, UL
• Color: Fixed
• Model NO.: SLM IC
• Customized: Non-Customized
• Standard: International
• Type: Bearing
• Material: Elastomer-metal combination
• Model No.: SLM-IC
• Ccontrol: Electronic
• Natural Frequency: 3-5Hz
• Size: Optional
• Capacity: 65-10000kg
• Usage: Measuring machines, plane tables, foundations etc.
• Transport Package: Carton
• Specification: Optional
• Trademark: THERMOTEST
• Origin: China
• Production Capacity: 500/Month

Product Description

Product Description

With the air suspension element SLM, natural frequencies between 3 and 5 Hz can be achieved during machine installation.

Delivery contents of standard IC pneumatic spring system
• 4 supporting points  
   - 3 pneumatic springs SLM type 
     Master with sensors and control valves  
   - 1 pneumatic spring SLM type 
     Slave without sensors and valves
• 1 control unit as 3-channel circuit board with USB Cable
• Control cable for master elements
• Hose NW 4 with cross piece or T-pieces
• Power adapter

Supply Conditions
•  Compressed air: operating pressure
1-  6 bar, dry, dust and oil free; alternative filter-regulator (FRK)
•    Control unit: Circuit board approx. 160 x 100 x 15 mm;
alternative circuit board in synthetic housing approx. 225 x 200 x 40 mm
•    Power supply: 24 V -1A; alternative power adapter, input 230 V, 50 Hz, 130 Watt, output 24 V, 1A, DC
•    PC interface: serial connection
•    Soft ware "Air Level Control" is required
•    Commissioning and adjusting of pneumatic spring system as well as operator training by EFFBE staff upon request

IC system The basic version of the IC pneumatic spring system is factory-programmed. However, the software allows varying the following parameters: reset accuracy, permissible  deflection, response time, average level. These parameters can be viewed, freely chosen within wide limits, and permanently stored in the control unit. The values are retained even after a  power failure. The factory default settings are documented in a datasheet.
 

Product Parameters

SLM Series Dimension table Dimensions in mm	D	H0	D1	G	L	S Machine base thickness (max.)	Ni	X	A	b	d	T	Weight     kg	Load (max.) kN
SLM 1A	73	65	28	M10	80	50	+/-5	12	75	60	7	3	0.3	0.65
SLM 3A	105	65	52	M12	90	65	+/-5	12	105	89	7	3	0.5	1.8
SLM 6A	127	90	60	M12	90	65	+/-6	15	130	108	7	3	1.0	2.8
SLM 12B	172	90	96	M12	90	65	+/-6	15	175	153	7	3	2.2	6.0
SLM 24A	245	90	138	M16	100	75	+/-6	15	255	215	14	5	7.2	13.0
SLM 48A	338	90	205	M16	100	75	+/-6	15	343	305	14	5	14.7	26.0
SLM 72A	380	91	255	M24*1.5	140	75	+/-6	17	385	310	20	6	22.5	38.0
SLM 96A	468	90	300	M24	130	75	+/-6	15	470	406	20	6	29.3	55.0
SLM 144A	550	91	360	M24*1.5	140	75	+/-6	17	555	480	20	6	46.5	76.0
SLM 192A	610	90	430	M24	130	75	+/-6	15	610	508	20	6	52.5	100.0

L=Screw length

IS Control Unit


Overview of programmable parameters
• Reset accuracy:  rough (+/- 0.5 mm, fine (+/- 0.1 mm), user-defined (+/- 0.01 mm ... 1 mm)
• Permissible deflection:  wide (+/- 1.0 mm), narrow  (+/- 0.5 mm), user-defined  (+/- 0.01 mm ... 1.5 mm)
• Response time:  fast (10 ms), slow (125 ms),  user-defined (5 ms ... 125 ms)
• Level:  Middle position (+/- 5 mm),  fine adjustment with potentiometer and / or software

Applicanance
 

Company Profile