| Customization: | Available |
|---|---|
| Material: | Alu alloy +SUS |
| Usage: | Automation and Control |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The THERMOTEST Diaphragm Pressure Cylinder KH GS 500 offers superior performance in industrial applications. It is designed to power up to a maximum pressure of 500 bar and long running life. Its integrated diaphragm ensures a high level of stoicism and reliability, even under extreme conditions.
The THERMOTEST KH GS 500 is a two short-stroke device with threaded shaft mounting.
THERMOTEST diaphragm cylinders can with advantage be used all-about where until now hydraulic or pneumatic cylinders where used.
In combination with adequate designed fittings the THERMOTEST diaphragm cylinders can be used as fastening device for receiver and as feed until for work pierce-transport. Further possible applications are the use as actuator for the operation of control units and valves.
A great advantage is, that the cylinders can be deliveried with various mounting possibilities.
THERMOTEST diaphragm-cylinders can be used by advantage in every usage of hydraulic pneumatic cyliners.
Housing: Al-alloy spray painted.
Piston rod made of stainless steel.
Guide bushing with self-lubrication.
Piston rod rotating.
Short-stroke device type KH GS 500
· Weight 2.6 kg
· Single-/double-acting
· Max. pressurisation = 10 bar
· Max. stroke = 50 mm
· Air consumption per stroke/6 bar =0.6 - 2.5 l
· Max. stroke frequency = 50/min. (ateffective valve cross section of 50 mm²)
· Ambient temperature = -20 °C - +80 °C
Dimensions
Type |
D1 | D2 | D4 | L1 | L2 | L3 | L4 | G1 | G2 | G3 | SW |
KH GS 500 |
166 | 45 | 16 | 222 | 35 | 30 | 20 | M26X1,5 | M14X1.5 | G3/8 | 12 |
){kind=link}