High Quality Industrial Control Air Spring Air Suspension double Convoluted Type

• Warranty: 12 months
• Part: Air Spring
• Position: Rear
• Type: Gas-Filled
• Spring Type: Air Spring
• Spring Material: Rubber
• Model NO.: 2B130118
• Structure: Double Cylinder
• Top Plate Hole/Stud: M10
• Top Plate Dia: 114mm
• Bottom Plate Dia: 114mm
• Pressure Ability: 0.2-0.8 M Pa
• Air Inlet: RC1/4″
• Quality: 100% Tested
• Transport Package: Cartons
• Specification: Optional
• Trademark: THERMOTEST
• Origin: China
• Production Capacity: 50000/Month

Product Description

Product Description

The rubber air spring (referred to as the rubber air bag) is filled with compressed gas (air pressure 0.5-1Mpa) in a sealed container, and uses the compressibility of the gas to realize its spring effect. The stiffness of this spring is variable. When the load acting on the spring hill increases, the quantitative gas in the container is compressed, and the air pressure increases, and the stiffness of the spring increases. On the contrary, when the load decreases, the air pressure in the spring decreases and the stiffness decreases. In this way, the rubber airbag has ideal elasticity. There are two types of rubber air springs: bladder type and diaphragm type. The bladder type rubber air spring is composed of a rubber air bladder sandwiched with cords and compressed air sealed in it. The inner layer of the bladder is made of air-tight rubber, while the outer layer is made of oil-resistant rubber. The upper and lower covers seal the air bag.


Product features

· Bladder air springs are categorized as single, double, and triple Convolute. Used for shock absorption and pneumatic actuation applications.

· Pressure: 0.7M Pa

· Shock Absorber Applications: Commonly used in single and double Convolute

· Natural frequency: 2.92HZ~3.87HZ

· Load range: 2.14KN~437.9KN

· Pneumatic Actuation Applications: Commonly used in single, double and triple bladders

· Working Stroke: 80mm

 

Product Parameters

 

 

Design Height (mm)	Min Height (mm)	Max Height (mm)	Max. Stroke mm
118	65	145	80
The mounting position and size of mounting holes & air Inlet  can be customzied

 

Load weight kg	Mounting Height        Filling Pressure	0.2 Mpa	0.3 MPa	0.4 MPa	0.5 MPa	0.6 MPa	0.7 MPa	0.8 MPa	The capacity at 0.7MPa(dm^3)
	65 mm	299	413	548	662	765	887	1002	0.56
	83 mm	224	338	442	540	654	782	891	0.62
	101mm	179	275	401	481	578	679	788	0.76
	119 mm	135	217	301	382	476	561	638	1.01
	137 mm	98	163	224	289	353	414	479	1.11
	145 mm	50	120	151	242	298	342	398	1.16
Stiffness & frquency	vertical stiffness   kg/cm	80	114	144	175	181	198	217
	Natural Frequency  Hz	3.87	3.63	3.46	3.39	3.08	2.98	2.92
	cpm	232	218	208	203	185	179	175

 

Detailed Photos

 

 

Company Profile